About
Dr. Pushpamalar Janarthanan completed her PhD at Monash University, Australia, and is currently an Associate Professor of Polymer and Organic Chemistry at Monash University Malaysia. She has published over 51 research papers in reputed international journals, holds one patent, the editor of a book on Nanotechnology in Medicine and seven book chapters. An experienced chemist with expertise in green chemistry, polymers, and materials science, Dr. Pushpa is a long-standing member of the Malaysian Institute of Chemistry and the International Association of Advanced Materials. She serves on several editorial boards and has reviewed for more than 45 high-impact journals. Dr. Pushpa has delivered numerous invited talks and keynote addresses at international conferences across Europe and Asia. She has examined over 55 postgraduate theses globally and contributes actively to scientific committees. Passionate about science outreach and STEM education, she leads public workshops and fairs that promote sustainable innovation and community engagement. I have been extensively involved in interdisciplinary projects that merge green chemistry, materials science, and environmental sustainability areas closely aligned with the objectives of the Monash Arts Environmental Research Accelerator (AERA). My work focuses on transforming agricultural biomass into value-added biopolymers and nanomaterials for healthcare and environmental applications, bridging the gap between scientific innovation and sustainable societal impact. Key relevant projects include: • Sustainable Biomass Utilization and Green Polymer Chemistry I led projects converting sago waste into biopolymers such as carboxymethyl cellulose for biomedical and environmental use. This initiative demonstrates circular economy principles by valorizing local agricultural by-products into high-value functional materials. o Publication: Pushpamalar et al., Carbohydrate Polymers, 2006. • Eco-friendly Hydrogels for Drug Delivery and Water Treatment My research team developed polysaccharide-based hydrogels and nanocomposites designed for controlled drug delivery, water purification, and sustainable agricultural applications. These systems are engineered to minimize environmental impact while enhancing human health outcomes. o Publications: Pushpamalar et al., Gels, 2021; Dahlan et al., Fibers and Polymers, 2025. • Nanotechnology for Environmental and Biomedical Innovation We have synthesized biodegradable nanoparticle–hydrogel systems for targeted drug delivery and pollutant removal, integrating nanoscience with environmental stewardship and health protection. o Publications: Veeramachineni et al., Cancer Nanotechnology, 2024; Neerooa et al., Gels, 2021. These projects reflect a sustained commitment to sustainability-driven materials innovation, with clear translational potential across environmental, medical, and societal domains. Her total publication citation are 2495 (as of 25May 2026), h-index of 24 and -i10 index of 35 My full list of publications is available here: 👉 Google Scholar Profile – Pushpamalar Janarthanan (https://scholar.google.com/citations?hl=en&user=kVSsvLsAAAAJ&view_op=list_works&sortby=pubdate) Researcher Orcid ID: orcid.org/0000-0002-6855-9412
Experience
Associate Professor
Monash University Malaysia
I am highly specialized and comprehensive skill set centered around academic leadership, advanced chemical research, and institutional service. Your skills can be broadly summarized into the following categories: 1. Research & Advanced Expertise in Green Chemistry Your primary scientific expertise lies at the intersection of polymer science and sustainable chemistry, as evidenced by your PhD in Applied Green Polymer Chemistry. Key research competencies include: • Biopolymer & Hydrogel Engineering: Advanced synthesis and characterization of eco-friendly smart hydrogels, specifically utilizing sago waste, oil palm biomass, and carboxymethyl cellulose (CMC). • Targeted Drug Delivery Systems: Development of biodegradable membranes, nano-capsules, and hydrogel composites tailored for controlled or targeted drug delivery (e.g., for cancer therapy, ophthalmic care, and transdermal patches). • Biomaterials & Nanotechnology: Expertise in electrospinning, tissue engineering (skin repair/regeneration, bone tissue engineering), and the green synthesis of nanoparticles (e.g., silver and iron oxide). • Environmental & Food Applications: Application of polymers for wastewater treatment (heavy metal/dye removal), soil conditioning, and food system encapsulation (probiotics and omega-3). • Intellectual Property Development: Proven capability to translate research into patented innovation, holding a registered Malaysian patent for "A polymeric film". 2. Academic Leadership & Research Mentorship You have a robust track record of nurturing the next generation of scientists and driving institutional research agendas: • Postgraduate & Undergraduate Supervision: Main or co-supervision of over 14 graduated and ongoing PhD candidates, alongside numerous Master’s, Honours, and international summer intern students. • Institutional Leadership: Experience steering major collaborative research frameworks in your capacity as the Deputy Director and Coordinator for the Monash-Industry Palm Oil Education and Research Platform. 3. Editorial & Peer-Review Proficiency You are an active and trusted contributor to the global scientific community, demonstrating critical analysis and quality control skills: • Editorial Board Leadership: Serving as an Editorial Board Member for reputable scientific journals, including BMC Chemistry (Springer Nature), Journal of Materials, and Processes. • High-Impact Peer Reviewing: Actively refereeing and evaluating complex research manuscripts for premier global journals such as Trends in Food Science & Technology (IF 16.0+), Critical Reviews in Food Science and Nutrition (IF 11.2+), and Carbohydrate Polymers. • Thesis & Conference Examination: Serving as a PhD thesis examiner for national and international candidates, as well as reviewing global conference technical papers. 4. Administration & Academic Service Your skills extend significantly into tertiary education management and institutional governance: • Curriculum & Student Progression: Contributing to academic integrity and student success strategies as a member of the School Academic Progress Committee. • Talent Acquisition & Mentorship: Serving as a PVC nominee on academic selection/interview committees and active mentoring of Early Career Academics. • Advocacy & Financial Oversight: Demonstrating governance capabilities through roles on the Gender Diversity Taskforce and past executive committee duties (such as Treasurer and Secretary) for the Monash University Malaysia Academic Staff Association (MUMASA).
Education
Monash University Australia
Doctor of Philosophy in Applied Green Polymer Chemistry
Monash University Australia
Graduate Certificate of Higher Education
University Putra Malaysia
Master of Science (Polymer Chemistry)
University Putra Malaysia
Bachelor of Science (Honours) (Pure Chemistry)
Skills
Other Publications
Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste
Carbohydrate polymers, May 2006
Sago pulp (57% w/w) isolated from sago waste was converted to carboxymethyl cellulose (CMC) by etherification using sodium monochloroacetate and sodium hydroxide. The reaction was optimized against temperature, concentration and reaction time. The optimized product has a large degree of substitution (DS) of 0.821, which compared favorably to other forms of cellulose. Fourier Transform Infrared spectra (FTIR) were used to characterize the product and starting sago pulp. Digital photographs of sago waste and sago pulp showed the expected rough woody structure while that of the CMC generated from the pulp showed a smooth surface morphology.
Application of metal nanoparticle–hydrogel composites in tissue regeneration
Bioengineering, Feb 2019
Challenges in organ transplantation such as high organ demand and biocompatibility issues have led scientists in the field of tissue engineering and regenerative medicine to work on the use of scaffolds as an alternative to transplantation. Among different types of scaffolds, polymeric hydrogel scaffolds have received considerable attention because of their biocompatibility and structural similarity to native tissues. However, hydrogel scaffolds have several limitations, such as weak mechanical property and a lack of bioactive property. On the other hand, noble metal particles, particularly gold (Au) and silver (Ag) nanoparticles (NPs), can be incorporated into the hydrogel matrix to form NP–hydrogel composite scaffolds with enhanced physical and biological properties. This review aims to highlight the potential of these hybrid materials in tissue engineering applications. Additionally, the main approaches that have been used for the synthesis of NP–hydrogel composites and the possible limitations and challenges associated with the application of these materials are discussed.
Biodegradable polysaccharides for controlled drug delivery
Gels, Sep 2021
Delivering a drug to the target site with minimal-to-no off-target cytotoxicity is the major determinant for the success of disease therapy. While the therapeutic efficacy and cytotoxicity of the drug play the main roles, the use of a suitable drug delivery system (DDS) is important to protect the drug along the administration route and release it at the desired target site. Polysaccharides have been extensively studied as a biomaterial for DDS development due to their high biocompatibility. More usefully, polysaccharides can be crosslinked with various molecules such as micro/nanoparticles and hydrogels to form a modified DDS. According to IUPAC, hydrogel is defined as the structure and processing of sols, gels, networks and inorganic–organic hybrids. This 3D network which often consists of a hydrophilic polymer can drastically improve the physical and chemical properties of DDS to increase the biodegradability and bioavailability of the carrier drugs. The advancement of nanotechnology also allows the construction of hydrogel DDS with enhanced functionalities such as stimuli-responsiveness, target specificity, sustained drug release, and therapeutic efficacy. This review provides a current update on the use of hydrogel DDS derived from polysaccharide-based materials in delivering various therapeutic molecules and drugs. We also highlighted the factors that affect the efficacy of these DDS and the current challenges of developing them for clinical use.
Electrospun cellulose acetate butyrate/polyethylene glycol (CAB/PEG) composite nanofibers: A potential scaffold for tissue engineering
Colloids and surfaces B: Biointerfaces, Apr 2020
Electrospinning is a common method to prepare nanofiber scaffolds for tissue engineering. One of the common cellulose esters, cellulose acetate butyrate (CAB), has been electrospun into nanofibers and studied. However, the intrinsic hydrophobicity of CAB limits its application in tissue engineering as it retards cell adhesion. In this study, the properties of CAB nanofibers were improved by fabricating the composite nanofibers made of CAB and hydrophilic polyethylene glycol (PEG). Different ratios of CAB to PEG were tested and only the ratio of 2:1 resulted in smooth and bead-free nanofibers. The tensile test results show that CAB/PEG composite nanofibers have 2-fold higher tensile strength than pure CAB nanofibers. The hydrophobicity of the composite nanofibers was also reduced based on the water contact angle analysis. As the hydrophilicity increases, the swelling ability of the composite nanofiber
Optimizing extraction of cellulose and synthesizing pharmaceutical grade carboxymethyl sago cellulose from Malaysian sago pulp
Applied Sciences, Jun 2016
Sago biomass is an agro-industrial waste produced in large quantities, mainly in the Asia-Pacific region and in particular South-East Asia. This work focuses on using sago biomass to obtain cellulose as the raw material, through chemical processing using acid hydrolysis, alkaline extraction, chlorination and bleaching, finally converting the material to pharmaceutical grade carboxymethyl sago cellulose (CMSC) by carboxymethylation. The cellulose was evaluated using Thermogravimetric Analysis (TGA), Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Differential Scanning Calorimetry (DSC) and Field Emission Scanning Electronic Microscopy (FESEM). The extracted cellulose was analyzed for cellulose composition, and subsequently modified to CMSC with a degree of substitution (DS) 0.6 by typical carboxymethylation reactions. X-ray diffraction analysis indicated that the crystallinity of the sago cellulose was reduced after carboxymethylation. FTIR and NMR studies indicate that the hydroxyl groups of the cellulose fibers were etherified through carboxymethylation to produce CMSC. Further characterization of the cellulose and CMSC were performed using FESEM and DSC. The purity of CMSC was analyzed according to the American Society for Testing and Materials (ASTM) International standards. In this case, acid and alkaline treatments coupled with high-pressure defibrillation were found to be effective in depolymerization and defibrillation of the cellulose fibers. The synthesized CMSC also shows no toxicity in the cell line studies and could be exploited as a pharmaceutical excipient.
Electrospun chitosan/polyethylene-oxide (PEO)/halloysites (HAL) membranes for bone regeneration applications
Applied Clay Science, Jun 2020
Fabricating biomaterials that mimic the extracellular matrix (ECM) environment of human tissue with appropriate functional, biomechanical, and biocompatible properties remains a challenge. This research aims to fabricate chitosan/polyethylene-oxide (PEO) membranes reinforced with halloysite nanotubes (HAL) as potential scaffolds for bone regeneration applications through facile electrospinning method. Morphological study through FESEM and STEM imaging demonstrated the presence of HAL along the chitosan/PEO fiber matrix with average fiber diameter ranged from 72.07 ± 3.30 nm to 154.87 ± 6.77 nm. Furthermore, the membranes incorporated with up to 5 wt% HAL revealed to have a larger pore, which was suitable for bone regeneration applications. Moreover, the mechanical tests showed that the fabricated chitosan/PEO/HAL membranes exhibited appropriate tensile strength properties to support the
Advances in extrusion-dripping encapsulation of probiotics and omega-3 rich oils
Trends in Food Science & Technology, May 2022
Background Probiotics and omega-3 rich oils are two health-beneficial bioactives added to a variety of foods to enhance their functional properties. However, these bioactives are highly sensitive to degradation during food handling and transit through the gastrointestinal tract (GIT). Scope and approach The goal of this review was to describe the benefits and drawbacks of extrusion technology in the food industry, as well as the viability of probiotics and oxidative stability of omega-3 rich oils encapsulated by extrusion technology after exposure to in vitro and in vivo systems, storage, and in the food system. This review also highlights the co-encapsulation concept of multiple bioactives along with the synergistic effects of co-encapsulated probiotics and omega-3 rich oils. Key findings and conclusions The survival of probiotics encapsulated using the extrusion process was found to be satisfactory in both the actual food
Eco-friendly smart hydrogels for soil conditioning and sustain release fertilizer
International Journal of Environmental Science and Technology, Oct 2018
In the agricultural industry, biomass waste generated along with the production of food, is transformed into value-added products. Also, the demand for the slow or control release fertilizer is increasing to reduce the cost of maintaining the agricultural land. These issues are tackled by converting biomass waste to a slow fertilizer release vehicle and biodegradable water retention material that could reduce the cost for fertilizer application and simultaneously preserved the soil from dryness. A series of carboxymethyl sago pulp (CMSP) hydrogels were prepared by electron beam irradiation. Slow release systems were evaluated by loading potassium nitrate (KNO3) and ammonium nitrate (NH4NO3) into the CMSP hydrogels. These CMSP hydrogels endow slow release property, biodegradability and a soil moisture preservation property that could find greener application in agricultural industries.
Antioxidant-rich nanofibrous scaffolds from renewable lignin and nanocellulose for next generation wound dressings
Industrial Crops and Products, Feb 2026
Chronic wounds remain a major clinical challenge creating demands for multifunctional wound dressings with antioxidant and biocompatible properties to accelerate healing. This study developed nanofibrous scaffolds by electrospinning polycaprolactone (PCL) blended with functionalized lignin-aminated polyethylene glycol (lignin-PEH-NH2) and nanocrystalline cellulose (NCC) derived from oil palm fruit bunches. The optimized lignin-PEG-NH2 (50:50) exhibited the highest antioxidant activity (83.70 % ± 4.81 free radical inhibition), while NCC showed a rod-like structure with an average diameter of 1.96 ± 0.46 μm and maximum distribution of 1.20 ± 0.32 μm. The resulting nanofibers were smooth, continuous, and bead-free, with suitable mechanical properties for wound applications. In vitro assays using normal human dermal fibroblasts (NHDFs) demonstrated excellent biocompatibility.
Encapsulation of flaxseed oil for improved oxidative stability: Protective mechanisms in mono-and co-encapsulated systems
International Journal of Food Science and Technology, May 2026
Flaxseed oil is a major plant-based source of omega-3 fatty acids, particularly α-linolenic acid, and is widely recognised for its nutritional and health benefits. However, this high degree of unsaturation also makes flaxseed oil highly susceptible to oxidative degradation during processing, storage, and gastrointestinal digestion, limiting its incorporation into food systems. This review discusses recent advances in the encapsulation of flaxseed oil, with emphasis on mono-encapsulation and co-encapsulation strategies developed to improve oxidative stability and functionality. Co-encapsulation refers to the simultaneous incorporation of flaxseed oil with additional bioactive compounds, such as antioxidants, polyphenol-rich extracts, vitamins, or probiotics, within a single delivery system, either as distinct co-localised core domains or as co-dispersed components within a continuous matrix without discrete core-shell.
Ultrasound-assisted extraction enhances recovery of antioxidant-rich carbohydrate fraction from mixed microalgae species
Ultrasonics Sonochemistry, Oct 2025
The effects of ultrasonic processing parameters on the functional and physicochemical properties of microalgae carbohydrates remain poorly understood, despite evidence from plant-based extractions showing that sonication conditions strongly influence bioactive compound yield and antioxidant activity from carbohydrates. This study investigated the effects of ultrasonic-assisted extraction (UAE) parameters on the yield, composition, and antioxidant activity of carbohydrates extracted from defatted mixed microalgae biomass. A single-factor approach was employed to test different extraction times (10–30 min), amplitudes (20–100 %), and solid-to-solvent ratios (1:10–1:30 g/mL). All analyses were conducted in triplicate, and statistical significance was determined at p < 0.05. Results showed that processing time was the most influential factor in improving antioxidant activity.
Electrospun Carboxymethylcellulose as a Scaffold for Biomedical Applications
Fibers and Polymers, Oct 2025
Electrospinning of pure carboxymethylcellulose (CMC) and its derivatives for biomedical applications is attractive due to their interesting biology and biomimetic properties. However, the main challenges in electrospinning pure CMC are strong electrostatic repulsions and its highly viscous nature. In this research, electrospun membranes consisting of grafted CMC-polyethylene glycol (CMC-PEG) and polycaprolactone (PCL) were successfully fabricated using emulsion electrospinning. Membranes with a PCL:CMC-PEG ratio of 80:20 formed uniform fiber with an average diameter of 930.2 ± 31.0 nm. Furthermore, PCL/CMC-PEG membranes demonstrated excellent mechanical properties suitable for use as scaffolds for soft tissue repair and skin wound healing. Water contact angle analysis showed that the incorporation of grafted CMC-PEG improved the membrane wettability.
Sustainable production of polyethylene glycol and furandicarboxylic acid copolymer (PEG-co-FDCA) from oil palm empty fruit bunch
Industrial Crops and Products, May 2025
The 2,5-furandicarboxylic acid (FDCA) is a valuable compound in the development of sustainable plastics, primarily serving as a building block for renewable alternatives to aromatic polyesters. This study describes the synthesis of FDCA from oil palm empty fruit bunch (OPEFB) and its copolymerization with polyethylene glycol (PEG). Cellulose (53 % yield) was extracted then hydrolyzed to glucose enzymatically (62 % yield) which was then further dehydrated to 5-hydroxymethylfurfural (HMF) (48 % yield) using a safer and greener solvent. The HMF was oxidized to FDCA under mild reaction conditions (67 % yield). Then, FDCA was successfully co-polymerized with PEG using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS) coupling mechanism to form PEG-co-FDCA with 58 % yield. The PEG-co-FDCA was found to be semicrystalline structure (50 % crystallinity).
Carboxymethyl-sagocellulose-stabilized Fe3O4 nanoparticles with 5-fluorouracil as photothermal agents for tumor ablation
Cancer Nanotechnology, Dec 2024
Background: There is a continuous growth of interest in the development of nanodrug delivery systems that could combine therapy and diagnosis of cancer. Results: Novel multifunctional superparamagnetic iron oxide nanoparticles (SPIONs, chemically Fe3O4) conjugated with carboxymethyl sagocellulose (CMSC), and 5-fluorouracil (Fe3O4-CMSC-5FU) were synthesized. The conjugated nanoparticles have the magnetic properties of the SPIONs, which allows the nanoparticles to be localized at the target area by applying an external magnetic field. SPIONs generate heat upon exposure to laser lights, resulting in a photothermic effect. The drug-loading efficiency of 5-FU into the SPIONs-CMSC conjugated nanoparticles was 70 to 84% w/w which could release the drug at intracellular pH (5.4) of cancer cells and resist drug release at pH 7.2. In vivo studies using mice models confirmed the nanoparticles could efficiently deliver 5-FU only to the cancer cells and the anticancer effect was enhanced by laser-induced hyperthermia. Conclusions: The combination of targeted delivery of 5-FU with photothermal therapy (PTT) looks promising for selective killing of cancer cells. Furthermore, SPIONs are an excellent contrasting agent for use in computerized tomography (CT) imaging for determining the tumor location and monitoring the progress of the therapy. The focus of this work was the oncological application of multifunctional Fe3O4-CMSC-5FU nanoparticle conjugates, with an emphasis on therapeutic, diagnostic and prognostic purposes.
Collaborator Notes
No notes yet.
Sign in to write a note.