About

Dr. T. K. Battula completed his B.E(ECE), M.E(ECE) and Ph.D.(ECE) from Andhra University, Visakhapatnam, Andhra Pradesh India. He worked in GIT, GITAM University for a period of 12 years at various levels as Assistant Professor, Sr.Assistant Professor and Associate Professor. He is currently working as Professor in Department of ECE, University College of Engineering Kakinada, Jawaharlal Nehru Technological University, Kakinada since 2016. His Research Areas of Interest are Fractional Order Systems, Nano Electronics, Fractional Order Signal Processing, and Analog VLSI.

Experience

Professor

Jawaharlal Nehru Technological University Kakinada

Jun 2016 - Sep 2025
Kakinada

Nature of the job is Teaching and Research

Associate Professor

Jawaharlal Nehru Technological University Kakinada

Jan 2013 - May 2016
Kakinada

Teaching and Research

Education

Andhra University

PhD

Jun 2006 - Jul 2009
Andhra University

Master of Engineeirng

Sep 1997 - Jul 1999
Andhra University

Bachelor of Engineering

Jul 1993 - Aug 1997
Lincoln University College, Malaysia

PDF

Aug 2022 - Sep 2023

Skills

MATLAB PYTHON LATEX PSPICE

Publications

114Publications
1240Citations
13h-index

Document and citation trends

0 10 20 0 250 500 2008 2026 2008: 3 publications, 218 citations 2009: 0 publications, 0 citations 2010: 1 publication, 467 citations 2011: 1 publication, 15 citations 2012: 6 publications, 58 citations 2013: 0 publications, 0 citations 2014: 4 publications, 14 citations 2015: 3 publications, 15 citations 2016: 5 publications, 3 citations 2017: 8 publications, 22 citations 2018: 6 publications, 38 citations 2019: 8 publications, 66 citations 2020: 9 publications, 144 citations 2021: 11 publications, 97 citations 2022: 12 publications, 29 citations 2023: 12 publications, 32 citations 2024: 11 publications, 10 citations 2025: 10 publications, 9 citations 2026: 4 publications, 3 citations

Publications Citations to them 2008 to 2026

Compiled from the open bibliographic record. These figures are counted from that record and are not the Top 2% ranking figures, so they will not match them.

Sort by
Cross‐Vehicle Attention Network for Distributed Multi-Modal Trajectory Forecasting and Collision Prediction

Journal of Computing Science and Engineering , 2026

0 citations 3 authors Last author
Interference-resilient design of aperiodic phased arrays for 5G applications using modified Laplacian invasive weed optimization

Advances in Science and Technology – Research Journal , 2026

0 citations 3 authors Last author Open access
Improved simplified fractional Fourier transform with hybrid black widow-elephant herding optimisation for detecting moving objects on ground

International Journal of Intelligent Information and Database Systems , 2026

0 citations 2 authors Last author Open access
A hybrid approach for machine learning based beat classification of ECG using different digital differentiators and DTCWT

Computers in Biology and Medicine , 2025

9 citations 2 authors Last author Open access
A novel attention based RNN-Kalman filter for accurate position forecasting framework

Proceedings of the Indian National Science Academy , 2025

0 citations 3 authors Last author
Heuristic-based cascaded convolutional neural network for enhanced artifacts removal from EEG signal

Signal Image and Video Processing , 2025

0 citations 3 authors Last author Journal tier 2
The development of novel fractional order differentiators and their applications

Results in Control and Optimization , 2025

0 citations 1 author First author Open access
Implementation of Fractional Order Lowpass Filter using different Approximation Techniques

Journal of Physics Conference Series , 2025

0 citations 1 author First author Open access Journal tier 4
Realization of Fractional Order Operations Using CNTFET Based Current Conveyors

International Scientific Journal of Engineering and Management , 2025

0 citations 2 authors First author

Other Publications

Studies on fractional order differentiators and integrators: A survey

Signal Processing, Mar 2011

Studies on analysis, design and applications of analog and digital differentiators and integrators of fractional order is the main objective of this paper. Time and frequency domain analysis, different ways of realization of fractance device is presented. Active and passive realization of fractance device of order 1 2 using continued fraction expansion is carried out. Later, time and frequency domain analysis of fractance based circuits is considered. The variations of rise time, peak time, settling time, time constant, percent overshoot with respect to fractional order α is presented. Digital differentiators and integrators of fractional order can be obtained by using direct and indirect discretization techniques. The s to z transforms used for this purpose are revisited. In this paper by using indirect discretization technique fractional order differentiators and integrators of order 1 2 and 1 4 are designed. These digital differentiators and integrators are implemented in real time using TMS320C6713 DSP processor and tested using National instruments education laboratory virtual instrumentation system (NIELVIS). The designed fractional order differentiators have been used for the detection of QRS sequences as well as the occurrence of Sino Atrial Rhythms in an ECG signal and also for the detection of edges in an image. The obtained results are in comparison with the conventional techniques.

Active and Passive Realization of Fractance Device of Order 1/2

Active and Passive Electronic Components, Apr 2008

Active and passive realization of Fractance device of order 1/2 is presented. The crucial point in the realization of fractance device is finding the rational approximation of its impedance function. In this paper, rational approximation is obtained by using continued fraction expansion. The rational approximation thus obtained is synthesized as a ladder network. The results obtained have shown considerable improvement over the previous techniques.

On design and applications of digital differentiators

2012 Fourth International Conference on Advanced Computing (ICoAC), Dec 2012

This paper deals with the design and applications of digital differentiators. For real time applications it is mandatory that a differentiator should have as small an order as possible. Different procedures available for the design of FIR and IIR type digital differentiators are presented. The IIR Type digital differentiators are obtained by inversion and magnitude stabilization of the existing digital integrators. In some applications like controls, waveshaping, oscillators and communications require a constant 90° phase for differentiators. In this paper an attempt is made to study about the variation of phase angle of digital differentiators with the application of fractional delay. The use of digital differentiators for the detection of edges in an image, QRS detection in an ECG signal is illustrated. It has been observed that the digital differentiators have shown superior performance compared to the well known gradient method. With the proven efficiency of the differentiators in various applications, they have been implemented in hardware using Verilog.

Design of fractional order digital differentiators and integrators using indirect discretization

Fractional Calculus and applied analysis, Jun 2008

In this paper, design of fractional order digital differentiators and integrators using indirect discretization is presented. The proposed approach is based on using continued fraction expansion to find the rational approximation of the fractional order operator, s^α. The rational approximation thus obtained is discretized by using s to z transforms. The proposed approach is tested for differentiators and integrators of orders 1/4 and 1/2. The results obtained compare favorably with the ideal characteristics.

Implementation of Fractional Order Lowpass Filter using different Approximation Techniques

Journal of Physics: Conference Series, Jul 2025

Interest in fractional order circuits is new but has grown across a variety of research institutions. A reasonable approximation of the fractional Laplace operator sα is crucial for designing fractional order filters. This article compares and discusses three popular ways to approximation techniques named as the Modified Stability Boundary Locus approach, the Reyad Elkhazali Method, and the Continued Fraction Expansion method. Following this phase, the suggested Fractional Order Low Filter transfer function will be examined and determined. The next phase in the process involves the generation of the indicated filter using an operational amplifier. Texas Instruments TINA software is used for the simulation of the proposed circuit. The outcomes greatly exceed what could be achieved with the currently employed procedures.

Design of Fractional Order Low Pass Filter Using Particle Swarm Optimization and Flower Pollination Algorithms

Journal of Active & Passive Electronic Devices, May 2025

A Novel Fractional Order Lowpass Filter(FOLPF) using optimization techniques named Particle Swarm Optimization(PSO) Method and Flower Pollination Algorithm (FPA) is proposed in this paper. The rational approximation is obtained using the two optimization techniques. Then the FOLPF Transfer function is obtained by the substitution of the sα. The active circuit is synthesized using Follow the Leader Topology and is simulated using TINA Software, it is found the the 0dB Bandwidth obtained using the proposed optimization techniques is superior to the conventional methods.

A hybrid approach for machine learning based beat classification of ECG using different digital differentiators and DTCWT

Computers in Biology and Medicine, Aug 2025

This research paper presents a systematic approach to ECG beat classification using advanced machine learning techniques. The study classifies ECG beats into six distinct classes based on annotations from the MIT-BIH Arrhythmia Database. The methodology incorporates manual feature extraction using the Dual-Tree Complex Wavelet Transform (DTCWT) to capture critical information from ECG signals. Four novel digital filters are employed for ECG signal differentiation to further enhance the discriminative power of the extracted features, effectively isolating key components such as R peaks and QRS complexes. The Pan–Tompkins algorithm is enhanced with these digital differentiators, improving its effectiveness in QRS detection. A comprehensive feature set is constructed, combining morphological features derived from DTCWT with four statistical features. This feature set is then used to train different machine learning classifiers, facilitating the precise classification of ECG beats. The performance of these classifiers is evaluated using key metrics, including accuracy, precision, recall, and F1 score. The experimental analysis, conducted on the complete MIT-BIH Arrhythmia Database comprising 48 records, ensures the robustness and generalizability of the proposed approach. The results demonstrate the efficacy of this methodology in accurately classifying ECG beats, making significant advancements in automated ECG analysis and cardiac signal processing.

Novel Fractional order Universal Filter using model order reduction techniques

2025 International Technical Conference on Circuits/Systems, Computers, and Communications (ITC-CSCC), Sep 2025

A unique Universal Filter utilizing the multi mode second generation current controlled current conveyors(MO-CCCII) and Model Order Reduction Techniques is proposed. The paper makes use of the model order reduction techniques for the design of filters. Any fractional-order filter can be made using a stationary phase element, also known as a fractional-order capacitor. It is suggested to use a fractional 0.2, 0.4-order filter. From reduced integer-order fractional differentiators, the fractional order capacitor was obtained by the Carlson method employing a third-order Foster I RC network circuit. The filter is tested and verified theoretically utilizing BJT-based MOCCCII and TINA Simulation. Results from comparisons with higher-order circuits show that filters implemented utilizing order reduction approaches produced comparable results with the original one.

Realization of fractional order lowpass filter using different approximation techniques

Bulletin of Electrical Engineering and Informatics, Jun 2023

Many research groups are starting to pay serious attention to the problem of fractional-order circuits. In this paper, a new approach to designing fractional order low-pass filter (FOLPF) is presented. Finding a rational approximation of the fractional Laplace operator sα is a crucial step in the design of fractional order filters. A comparative study of the most widely used approximation techniques named continued fraction expansion (CFE) method and Biquadratic Approximation (RE) method is performed. Then the transfer function of the proposed FOLPF is calculated. Using operational amplifier, the proposed filter is synthesized. The proposed circuit is simulated using Texas instruments TINA software. The results obtained outperform the existing methods.

Various methods of realization for fractional-order elements

ECTI Transactions on Electrical Engineering, Electronics, and Communications, Feb 2023

Fractional-order circuits are finding applications in control systems, signal processing, and other allied fields. As a result, realizing fractional-order elements or fractance devices is an essential research topic. A unique fractance device is realized in this study using continued fraction expansion (CFE) and partial fraction expansion (PFE) formulas. Continued fraction expansion is used to calculate the rational approximation. For simulation, the fourth order rational approximation for fractional order, α = −1∕2,−1∕3,−1∕4 is used. All simulations are carried out with the help of the MATLAB and TINA software packages. The theoretical and simulation results are in agreement.

Recent developments on the realization of fractance device

Fractional Calculus and applied analysis, Dec 2021

A detailed analysis of the recent developments on the realization of fractance device is presented. A fractance device which is used to exhibit fractional order impedance properties finds applications in many branches of science and engineering. Realization of fractance device is a challenging job for the people working in this area. A term fractional order element, constant phase element, fractor, fractance, fractional order differintegrator, fractional order differentiator can be used interchangeably. In general, a fractance device can be realized in two ways. One is using rational approximations and the other is using capacitor physical realization principle. In this paper, an attempt is made to summarize the recent developments on the realization of fractance device. The various mathematical approximations are studied and a comparative analysis is also performed using MATLAB. Fourth order approximation is selected for the realization. The passive and active networks synthesized are simulated using TINA software. Various physical realizations of fractance device, their advantages and disadvantages are mentioned. Experimental results coincide with simulated results.

Design of a Fractional Order Low-pass Filter Using a Differential Voltage Current Conveyor

Journal of Telecommunications and Information Technology, May 2023

In this paper, an active implementation of a differential voltage current conveyor (DVCC) based on a low-pass filter operating in the fractional order domain is presented. The transfer function for a fractional order system is dependent on the rational approximation of sα. Different methods used for calculating the rational approximation, including Carlson, Elkhazalil, and curve fitting, are evaluated here. Finally, to validate the theoretical results, a fractional order Butterworth filter is simulated in the Pspice environment using the 0.5 micrometer CMOS technology with an R-C network-based fractional order capacitor. Additionally, using the Monte Carlo analysis, the impact of current and voltage faults on DVCC response is investigated. It has been inferred that realization with a wider bandwidth is possible.

Design of digital differentiators and integrators of order 1/2

World Journal of Modelling and Simulation, May 2008

In this paper, design of digital differentiators and integrators of order 1 2 is presented. First, the rational approximation for the fractional operator s±1 2 is calculated. Next, using s to z transforms it is digitized. The results obtained were closer to ideal characteristics.

Binary phase coded sequence generation using fractional order logistic equation

Circuits, Systems, and Signal Processing, Feb 2012

This brief presents the use of fractional order logistic equation to generate radar sequences. A generalized expression for logistic equation is presented. Later, the generation of binary phase code sequences using fractional order logistic map is discussed. It has been observed that sequences with good merit factor can be generated by varying fractional order, α.

Electrocardiogram signal and linear time–frequency transforms

Journal of The Institution of Engineers (India): Series B, Dec 2014

The diagnostic analysis of non-stationary multi component signals such as electrocardiogram (ECG) involves the use of time–frequency transforms. So, the application of time–frequency transforms to an ECG signal is an important problem of research. In this paper, initially, linear transforms like short time Fourier transform, continuous wavelet transforms, s-transform etc. are revisited. Then the application of these transforms to normal and abnormal ECG signals is illustrated. It has been observed that s-transform provides better time and frequency resolution compared to other linear transforms. The fractional Fourier transform provides rotation to the spectrogram representation.

Speech enhancement using fractional order spectral subtraction method

International Journal of Control Theory and Applications, Apr 2015

Spectral subtraction method is proven to be one of the most efficient algorithm for the enhancement of speech. Fractional Fourier Transform (FRFT) is the generalization of the Fourier Transform. The discrete version of FRFT called as DFRFT is defined in several ways by different people. In this paper, a novel spectral subtraction method is proposed by replacing Fast Fourier Transform (FFT) with FRFT. The performance of the proposed system is evaluated in terms of Mean Squared Error (MSE) and Peak Signal to Noise Ratio (PSNR) for different values of fractional order, α and compared with the conventional techniques by using different definitions of DFRFT.

Enhanced Meta-Heuristic Approach for Echo Suppression in Synthetic Aperture Radar Using Non-Periodic Interrupted Sampling

Traitement du Signal, Apr 2025

Echo cancellation is a deception jamming technique designed to nullify the target's echo and prevent its detection by enemy radar. Traditional methods rely on time-domain synchronization, but they struggle to fully suppress echoes when there is an amplitude mismatch. This limitation often leaves the target partially visible in synthetic aperture radar (SAR) images, reducing the effectiveness of the jamming technique. Non-periodic interrupted sampling modulation (NP-ISM) is applied as it produces a continuous jamming strip instead of discrete false targets whereas in Periodic sampling multiple false targets emerge even the real target echo is canceled which makes it easy to be countered by enemy radar. The improved henry gas solubility optimization algorithm (IHGSOA) is applied in the echo cancellation model to optimize the random rectangular envelope pulse train in the NP-ISM which enhances signal …

Novel Least Mean Square Algorithm Using First order Al-Alaoui Digital Differentiator

National Academy Science Letters, Dec 2018

This paper proposes a Novel least mean square algorithm using First order Al-Alaoui differentiator.The performance of the proposed Algorithm is compared with existing algorithms by taking an example. The results prove the efficacy of the proposed Algorithm.

Analyzing the Impact of Polynomial NLFM Signals on Radar Performance with Uniform and Non-Uniform PRI in Doppler Effect and Noise Environments.

International Journal of Performability Engineering, Aug 2024

The problem of determining a suitable radar signal while reducing the autocorrelation sidelobes and analyzing such radar signal under Doppler Effect and background noise environments with non-uniform PRI is addressed. The high peak sidelobe isthe fundamental drawback for a Linear Frequency Modulated signal (LFM), despite its advantage in the simplicity and Doppler tolerance properties. To address this issue, an Improved Polynomial-I & Polynomial-II Non-Linear Frequency Modulation (NLFM) signal was designed. Prior research demonstrated that constructed Polynomial NLFM (PNLFM) with Non-Uniform Pulse Repetition Interval (PRI) signal provides reduced Peak Side Lobe level (PSL) compared to LFM. To examine the overall performance, research is done on the produced PNLFM signal in the condition of Doppler Effect and background noise. The background noise considered is Additive white Gaussian noise (AWGN) with SNR values ranging from -20dB to 20dB. Simulations are performed using various doppler frequencies and background noises. The simulation results show that the PNLFM is Doppler-tolerant in the Doppler shift case, i.e. there is no effect on PSL levels with the doppler frequency change in either the uniform or non-uniform PRI case. However, with high background noise the PSL levels get affected, which increases the PSL values. From the results, it is observed that the PNLFM with Non-Uniform PRI has a good detectability since the peak side lobe level is low in certain cases of heavy background noise.

A Novel Intelligent Ground Moving Target Indication Using Meta-Heuristic-Based Simplified Fractional Fourier Transform

Cybernetics and Systems, Oct 2022

One of the most significant subfields in “Synthetic Aperture Radar (SAR)” research is considered to be target detection. Numerous studies have been conducted on target identification, with the majority of them favoring filter-oriented methods. The fundamental goal of radar systems is to “detect moving targets on the ground.” Decomposing a complex matrix into a structured sparse matrix and a low-rank matrix is a fundamental mathematics issue. Surveillance and reconnaissance rely heavily on “Ground Moving Target Indication (GMTI),” but it's not a simple task. The SAR ATI was first developed for calculating the radial velocity of ground-moving objects. Yet, overlapping stationary clutter can corrupt the recorded differential phase, resulting in mistakes in position and velocity calculations. The main concept of this paper is to propose a novel “Adaptive Simplified Fractional Fourier Transform (A-SFrFT)” using the intelligent meta-heuristic improvement. This adaptive SFrFT efficiently estimates the “Doppler parameters of the moving targets.” The improved “Harris Hawks Optimization (HHO)” termed Trio Updating HHO (TU-HHO) is used as the meta-heuristic algorithm that enhances the performance of the SFrFT-based target estimation. The mathematical analysis and simulation findings show that the suggested methods recommended strategy is successful.

Collaborator Notes

No notes yet.

Sign in to write a note.

Sign in to message, connect with or follow Tirumala Krishna Battula.

Create free account